99.999% uptime (five nines)
99.999% uptime allows 26s of downtime in a 30-day month and 5m 15s in a year. Per day that is 0.9s; per week, 6.0s. Here is what fits in that budget, who promises 99.999%, and how to measure whether you're meeting it.
How much downtime is 99.999%?
Uptime is the share of time a service answers. The remaining 0.001% is the downtime budget, and it only looks small until it's written in minutes. The month figure uses 30 days; the year uses 365.
| Period | Allowed downtime |
|---|---|
| Per day | 0.9s |
| Per week | 6.0s |
| Per month (30 days) | 26s |
| Per year | 5m 15s |
What 99.999% means in practice
Twenty-six seconds a month means no outage a human ever sees. Every component has to be duplicated and the switch between them has to happen in seconds without anyone involved. A single DNS change propagating slowly, a certificate renewal that pauses a load balancer, or a deploy that takes thirty seconds to warm up is enough to miss the month.
Five nines is a property of a whole system, including the networks between it and the user, and most of that isn't under your control.
Who promises 99.999%
Five nines comes from telephone networks and carrier-grade equipment, where it's measured over the core network rather than any one customer's line. Some cloud providers promise it for a few globally replicated services such as DNS. No ordinary web hosting plan promises it.
When a SaaS marketing page says "99.999%", it's usually describing a past result on a good year, not a contractual promise.
How to measure it
Uptime is only a number if something is measuring it from outside, often enough to see short outages. heyUptime checks every 30 seconds (60 on Starter), confirms a failure with a second check before counting it, keeps 90 days of history on the status page, and sends a weekly summary with the uptime percentage per monitor. That's the figure to compare with 99.999%.
To turn any percentage into minutes, or minutes into a percentage, use the uptime calculator.
- Checks every 30 to 60 seconds; shorter outages than that can't be seen by any external monitor.
- Confirmed failures: a single slow response doesn't count as downtime.
- Maintenance windows are recorded but not counted as outages on the status page.
- The weekly summary reports uptime and response time per monitor for the week.
Is 99.999% enough for you?
In short: 99.999% is not a sensible target for a website or a SaaS product. Promise 99.9% or 99.95%, measure it, and spend the difference on faster recovery.
You can still measure against it: checks every 30 seconds, confirmed failures, 90-day history. But at this level a single confirmed outage puts the month over budget, so the number is mostly useful for seeing how far above three or four nines you actually run.
Questions
How much downtime is 99.999% per year?
5 minutes and 15 seconds a year; 26 seconds a month; under a second a day.
Is 99.999% uptime possible?
For a carefully built, fully redundant system with automatic failover, measured over the parts the operator controls, yes. For a website measured from the outside, including DNS and the internet in between, it's rarely achieved and almost never promised.
What does "five nines" mean?
99.999% uptime: five nines in the number. It allows ten times less downtime than four nines (99.99%, 4m 19s a month) and a hundred times less than three nines (99.9%, 43m 12s a month).
See it on your own site.
heyUptime checks every 30 seconds, confirms before alerting, and tells you why it's down in plain words. Free for 14 days, no card.
Related
Updated October 8, 2026.